645 Preformed Pavement Marking

1. Specifications:

Item 740.05, Types A1, A2 and A3, C & MS

Item 740.06,  Types I and II, C & MS

2. Sampling and/or Inspection Requirements:

Acceptance:

Minimum performance requirements are found in Supplement 1047.  Physical and chemical properties are found in Item 740.05 and 740.06.

Refer to OMM website located at http://www.dot.state.oh.us/Divisions/ConstructionMgt/Materials/Approved-List/Pages/default.aspx to determine if the material and manufacturer has an approved status. Verify type and brand name of material is on the  approved list prior to use. 

 

Inspect material container for markings, expiration date and condition.  Do not apply materials that have exceeded the manufacturer’s shelf life. Do not use preformed markings that are subject to premature adhesion or contamination before placement.

Document material in CMS.

3. Methods of Tests:

Item 740 C & MS