|705.04 Hot Applied Joint Sealer|
2. Sampling and/or Inspection Requirements:
Acceptance for use of liquid asphalt material will be under the following plan: (Field)
Partial Plant Inspection:
Details of this procedure are covered in Appendix C
If documentation cannot be verified under the Partial Plant Inspection plan, joint sealer must be approved before use. Sample at destination following the procedure outlined below.
Field Sampling Procedure:
Obtain unopened package from the project and ship to OMM. If material is already incorporated into the project process as unapproved material thru the policy ‘Acceptance of Non-specification Material on Construction Projects’.
Samples shall be accompanied by a TE-31.
3. Methods of Test:
(OMM Asphalt Materials Section)
ASTM D 6690, Type II