712.01 Expansion Shield Anchors

1. Specification:

712.01 C&MS.

2. Sampling and/or Inspection Requirements:

Inspected after delivery to the project for dimensions and condition. Dimensions shall be checked for compliance with the plan requirements. (Field)

Qualified Product List (QPL)

Only material that is approved as a Qualified Product may be used. To verify, refer to Qualified Product List (QPL) on the OMM website http://www.dot.state.oh.us/Divisions/ConstructionMgt/Materials/Pages/QPL.aspx. Suppliers who are interested in approval of their products should follow the requirements defined for this product on the list website.

No sample required.

3. Methods of Test:

(OMM)

Federal Specification FF-S-325, Group II, Type 4 Class 1 and Group VII, Type I