707.31 Corrugated Polyethylene Drainage Tubing

1. Specification:

707.31 C&MS.

S 1066

2. Sampling and/or Inspection Requirements:

Inspect material delivered to the site for dimensions and condition. The nominal inside diameter shall be 3, 4, 5, 6, 7, 8, 9 or 10 inches. The pipe shall be free from visible defects. It shall not exhibit cracking or splitting. Pipe damaged by crushing or stretching shall not be used.(Field)

The tubing and fittings shall be marked AASHTO M 252, manufacturer's name or trademark, nominal size, plant designation and date of manufacture. Tubing shall be clearly marked at intervals of not more than 10 feet.

Certification:

Supplement 1066 defines certification requirements for acceptance of polyethylene pipe products. The Department will only accept products from Manufacturers certified under this supplement.

For a list of certified producers visit the OMM website at

http://www.dot.state.oh.us/Divisions/ConstructionMgt/Materials/Pages/PlasticPipecertified.aspx

The manufacturer will ship products using the Department's Virtual Warehouse (TE-24) system. When shipping HDPE materials, the Manufacturer will include a Bill of Lading defining the components being provided under the TE-24 certification with the Shipping Notice.

No sample is required.

3. Method of Test:

(OMM)

AASHTO M 252

4. Addendum:

Pipe Types:

Type C Single wall corrugated pipe

Type CP Type C with perforations

Type S Dual wall pipe, Outer corrugated wall, inner smooth wall

Type SP Type S with perforations

Perforations:

Diameter Rows of perforations H L
3" (75) 2 1" (35) 2" (50)
4" (100) 2 1 " (45) 2 " (65)
6" (150) 4 2 " (70) 3 " (95)
8" (200) 4 3 " (95) 5 " (130)
10" (250) 4 4 " (120) 6 5/16" (160)