711.01 Structural Steel

1. Specification:

711.01, 711.04, 711.07, 711.16, 711.17, 711.18 and 711.19 C&MS.

513 C&MS

Certification - Supplement 1078

Work performed according to item 513 Structural Steel Members using pre-qualified fabricators. A list of suppliers is available at the OMM website http://www.dot.state.oh.us/testlab/ Pre-qualified fabricators per Supplement Specification 863, 2002 C&MS Items 513, 516, 717 & 518 fabricated members

2. Sampling and/or Inspection Requirements:

Item 513/863 Level 1 through 6 and UF Structural Members will be shop inspected prior to shipment and use in construction projects. After shop inspection acceptance, members shall be shipped to the construction project accompanied by a TE-24. Final acceptance is based upon the Engineer's approval that the structural member can be successfully incorporated into the structure.

Item 513/863 Level SF does not require shop inspection. These items shall be shipped to the construction project accompanied by a TE-24. Final acceptance is based upon the Engineer's approval that the structural member can be successfully incorporated into the structure.

No sample required.

If material is sold as per plan and no TE-24 is required check certified test reports for material acceptability and domestic origin requirements.

3. Methods of Tests:

None required unless requested by Office of Materials Management. Methods of tests will be appropriate ASTM procedures. (OMM)