732.19 Cable and Wire

1. Specification:

732.19 C&MS

732.19-01 Table

2. Sampling and/or Inspection Requirements:

All material shall be inspected after delivery to the project for conformance to dimension and shall be free of imperfections affecting strength or durability (i.e. nicks, cuts, etc).

Cable Markings:

Size printed every 24 inches

All other printed every 40 inches including:

Name of wire manufacturer

Voltage rating of the cable i.e. 600V

Date of Manufacture

Qualified Product List (QPL)

No sample is required. Only material that is approved as a Qualified Product may be used. To verify, refer to Qualified Product List (QPL) on the OMM website http://www.dot.state.oh.us/Divisions/ConstructionMgt/Materials/Pages/QPL.aspx. Suppliers who are interested in approval of their products should follow the requirements defined for this product on the list website.

3. Method of Test:

732.19