410 Traffic Compacted Surface

Because of the simplicity this item of work, no detailed explanation of the item is required in this manual.

 

Documentation Requirements - 410 Traffic Compacted Surface

1.        Materials

2.        Subgrade condition.

3.        Document location where material was used on the ticket.

4.        State if all load was used; if not, be sure to get a weigh back

5.        Blading operation.

6.        Maintenance.

7.        Weigh tickets should be totaled with an initialed and dated tape attached. Convert to cubic yards as per 410.06 of the C&MS.

8.        Pay and measure according to 410.06 and 410.07.

9.        Document on CA-D-1 and CA-EW-12.  Do not duplicate the information on these forms unless necessary.