617 Reconditioning Shoulders

Because of the simplicity of this item of work, no detailed explanation of the item is required in this manual.

 

Documentation Requirements - 617 Reconditioning Shoulders

1.        Materials.

2.        Place location or stationing where material was used.

3.        Shoulder preparation.

4.        Average depth and width.

5.        Spreading.

6.        How was material compacted?

7.        Attach initialed dated tape to tickets and convert as per Table 617.06-1 of the C&MS. 

8.        Measure and pay according to 617.06 and 617.07.

9.        Document on CA-D-1, CA-D-2, and CA-EW-12.  Do not duplicate the information on these forms unless necessary.