1. Material Type, 740.02.
a. Traffic Paint Type 1, fast dry, water-based paint.
b. Traffic Paint Type 1A, fast dry, water-based paint for
cold weather conditions.
2. Glass beads, 740.09
Type A.
3. Application of Traffic Paint, Item 642, Type 1 and 1A.
a. Traffic Paint Type 1 shall be applied when the
pavement and air temperature are 50 °F and above.
b. Traffic Paint Type 1A shall be applied when the
pavement and air temperature are between 35 °F and 50 °F.
c. Glass beads, 740.09
Type A shall be applied at the rate of 15 pounds per 100 square feet of Type 1
traffic paint applied.
d. Glass beads, 740.09
Type A shall be applied at the rate of 8 pounds per 100 square feet of Type 1A
traffic paint applied.
e. Type 1 Traffic Paint shall be applied at the rate of
22 gallons per mile of 4-inch solid line, 33 gallons per mile of 6-inch solid
line, and/or 1.25 gallons per 100 square feet.
f. Type 1A Traffic Paint shall be applied at the rate of
16 gallons per mile of 4-inch solid line, 24 gallons per mile of 6-inch solid
line, and/or 0.94 gallon per 100 square feet.
g. Striper equipment speed shall be according to the
paint manufacturer’s recommendations.
h. Coning of line required because pavement marking is
not track free in 2 minutes or less.
1. General requirements per 641.
2. Material as per 740.02
and 740.09,
SS
1047 and SS
1089.
3. Temperature above 50 °F for Type 1.
4. Temperature between 35 °F and 50 °F for Type 1A.
5. Location and/or stationing of where work is performed.
6. Measure in appropriate unit and turn in for pay.
7. Use form CA-D-3A
to document information.