1. Material Types, 740.05
and 740.06.
2. Type A, Item 740.05,
shall be used for permanent markings.
a. Type A1 material, 0.090 inches thick, shall be applied
with a pre-coated adhesive layer.
b. Type A2 material, 0.060 inches thick, shall be applied
with a pre-coated adhesive layer.
c. Type A3 material, 0.020 inches thick, shall be applied
with a pre-coated adhesive layer.
3. Type B, Item 740.06,
0.015 inches thick, shall be used for Work Zone Pavement Markings.
a. Type B, Type II material (non-removable).
4. Type C, Item 740.06,
0.030 inches thick, shall be used for Work Zone Pavement Markings.
a. Type C, Type I material (removable).
5. Glass beads, none.
6. Application of Preformed Pavement Marking, Item 645.
a. Preformed Pavement Marking shall be applied according
to the manufacturer’s recommendations packed with the material.
1. General requirements per 645.
2. Material as per 740.05,
740.06
and SS
1047 and SS
1089.
3. Air and pavement temperature, type and condition of
existing pavement.
a. Temperature requirements are outlined in 645.03.
4. Location and/or stationing of where work is performed.
5. Measure in appropriate unit and turn in for pay.
6. Use form CA-D-3A
to document information.