1. Material Types, 740.05 and 740.06
2. Type A, Item 740.05 shall be used for permanent markings.
a. Type A1 material, 0.090 inch ( 2.28 mm) thick shall be applied with pre-coated adhesive layer.
b. Type A2 material, 0.060 inch (1.52 mm) thick shall be applied with pre-coated adhesive layer.
c. Type A3 material, 0.020 inch (0.50 mm) thick shall be applied with pre-coated adhesive layer.
3. Type B Item 740.06, 0.015 inch (0.38 mm) thick, shall be used for Work Zone Pavement Markings.
a. Type B, Type II material (non-removable)
4. Type C Item 740.06, 0.030 inch (0.76 mm) thick, shall be used for Work Zone Pavement Markings.
a. Type C Type I material (removable)
5. Glass beads, None
6. Application of Preformed Pavement Marking, Item 645
a. Preformed Pavement Marking shall be applied according to the manufacturer’s recommendations packed with material.
1. Ambient air temperature, type, and condition of existing pavement. Also pavement temperature
a. Temperature requirements are outlined in 645.03 or per manufacturer’s recommendations
2. Location and/or stationing where work performed
3. Pavement markings applied per manufacturer’s recommendation. Materials as per 740.05 and 740.06
4. Measure in appropriate unit and turn in for pay
5. Use form CA-D-3A to document information