701  CEMENTITIOUS MATERIALS

701.00  Acceptance.  Provide cements meeting 701.01, 701.02, 701.04, 701.05, 701.07 and 701.09 and certified according to Supplement 1028; fly ash meeting 701.13 and certified according to Supplement 1026; ground, granulated blast furnace slag meeting 701.11 and certified according to Supplement 1034; and micro silica meeting 701.10 and certified according to Supplement 1045 without prior sampling, testing and approval by the Department.  Lists for certified cement, fly ash, GGBF slag and micro silica sources are maintained by the Laboratory.

701.01  Air-Entraining Portland Cement.  Provide air-entraining portland cement according to ASTM C 150, Type IA.  The Gillmore time of set and the air permeability (fineness) tests will govern.

701.02  Portland Cement.  Provide portland cement according to ASTM C 150, Type II.  The Gillmore time of set and the air permeability (fineness) tests will govern.

701.04  Portland Cement.  Provide portland cement according to ASTM C 150, Type I.  The Gillmore time of set and the air permeability (fineness) tests will govern.

701.05  High Early Strength Portland Cement.  Provide high early strength portland cement according to ASTM C 150, Type III.  The Gillmore time of set test shall govern.

701.07  Masonry Cement.  Provide masonry cement according to ASTM C 91.

701.09  Slag Modified Portland Cement.  Provide slag modified portland cement according to ASTM C 595, Type I (SM).

701.10  Micro-Silica.  Provide micro-silica according to ASTM C 1240.  Do not use micro-silica admixtures in dissolvable bags.

701.11  Ground Granulated Blast Furnace (GGBF) Slag.  Provide ground granulated blast furnace (GGBF) according  to ASTM C 989, Grade 100 minimum.

701.13  Fly Ash for Use in Portland Cement Concrete.  Provide fly ash according to ASTM C 618, Class C or F, except ensure a maximum loss on ignition of 3 percent.