ITEM 411  STABILIZED CRUSHED AGGREGATE

411.01  Description

411.02  Materials

411.03  Construction Methods

411.04  Method of Measurement

411.05  Basis of Payment

 

411.01  Description.  This work consists of placing a compacted course or courses of crushed aggregate.

411.02  Materials.  Furnish materials conforming to 703.18.

411.03  Construction Methods.  Construct the subgrade according to Item 204.  Use the spreading and compaction requirements of Item 304, except as modified by the following:

A.     Use a maximum compacted lift thickness of 6 inches (150 mm).

B.      Perform the initial compaction of the material by using crawler type tractors, tamping rollers, trench rollers, suitable pneumatic tire equipment, or other suitable equipment.

C.      Perform final compaction of the surface of the stabilized crushed aggregate by using approved pneumatic tire equipment.

411.04  Method of Measurement.  The Department will measure Stabilized Crushed Aggregate by the number of cubic yards (cubic meters), computed from the profile grade, cross-sections and typical sections, compacted in place.

When the plans provide for the use of material in variable width or depth of course and the quantity cannot be readily calculated from the profile grade, typical sections and cross-sections, the Department will measure the cubic yards (cubic meters) by converting weights to cubic yards (cubic meters) according to the following:

Aggregate

lb/yd3

kg/m3

Crushed Stone

3800

2250

Crushed Gravel

3900

2300

Crushed Slag, less than 90 lb/ft3 (1450 kg/m3)[1]

3600

2150

Crushed Slag, 90 to 100 lb/ft3 (1450 to 1600 kg/m3)[1]

4000

2350

Crushed Slag, more than 100 lb/ft3 (1600 kg/m3)[1]

4500

2600

Granulated Slag

2800

1650

Recycled Portland Cement Concrete

3400

2020

Recycled Asphalt Concrete Pavement

4000

2400

[1]  Based on average dry rodded weight on record at the Laboratory.  The conversion factors listed are the long gradation weights.  These numbers are based on the dry rodded weights of Nos. 67, 57, or 8 gradation.  The Department will determine slag weights based on weights obtained from the original source.

 

The Department will classify salvaged or mixed materials according to the material that makes up the majority of the mixture.

Ensure that the moistures of the delivered material are less than 2 percent above saturated surface dry condition; if not, the Department will base payment on the dry densities and dry weights.

Furnish freight bills or certified weight bills according to 109.

411.05  Basis of Payment.  The Department will pay for accepted quantities at the contract price as follows:

Item           unit                                Description

411             Cubic Yard                      Stabilized Crushed
                       (Cubic Meter)                 Aggregate