Ohio.gov State Agencies  |  Online Services
Skip Ribbon Commands
Skip to main content
Navigate Up
Sign In

Quick Launch

​Office of Materials Management

​Date Last Edited: April 30, 2013
Product: Lifting Hole Plug Device​
Contact Brad Young (614) 351-2882
NEW PRODUCT APPROVAL​
​For a new product to be considered it must be specifically designed for plugging lifting holes. It must be demonstrated by the manufacturer that the device will last for the life of the concrete unit in the environment for which it will be exposed.
DESCRIPTION​
​These plugs are incidental to the item but only approved items on this list should be used. Lifting plug devices mat be used in lieu of precast concrete plug or mortar items.
ITEM REFERENCE​ ​MATERIALS
706.02
706.04
706.13
Concrete Pipe
Elliptical Culverts, Sotrm Drain, and Sewer Pipe
Precast Reinforced Concrete Items​
PREPARATION​

​Prepare lifting holes as recommended by the Manufacturer. Oversized holes or holes damaged during handling may require an alternate method of plugging the hole, such as use of a grout.

​COMPLIANCE
​Inspect to ensure complete closure of the lifting hole. No sample is required.

  

​COMPANY ​PRODUCT - HOLE SIZE SPECIFICATION
​POPIT, INC ​POPIT PLUG - 2-1/4" TO 3- 1/8" POPIT SPECS
​922 S. WOODBURNE RD
​PMB# 333
​LEVITTOWN, PA 19057
​(215) 945-5201